American headquarters. Otis USA & Canada. Otis Elevator Company 11760 US Hwy 1 Suite W600 Palm Beach Gardens, FL 33408 USA. A small area outside the elevator hoist-way is required to accommodate the controller and the hydraulic pump unit. This area can be adjacent to the elevator hoist-way or in a remote location. Another advantage to the hydraulic drive system is that manual lowering operations are much easier for those with limited strength or mobility. Is not capable of delivering more than the maximum line short circuit current amperes listed in the appropriate control manual, 230 VAC or 460 VAC maximum per control rating. Caution: Disconnect motor leads (T1, T2 and T3) from control before you perform a “Megger” test. Failure to disconnect motor from the.

1. Hydraulic Otis Elevator Phone Line Manuals
2. Hydraulic Otis Elevator Phone Line Manual Pdf
3. Viking Elevator Phone
4. Hydraulic Otis Elevator Phone Line Manual Software

When it comes to residential elevator systems, hydraulic drives are a popular choice for homeowners looking for quality, safety, and the ‘quietest’ ride.

Hydraulic home elevator systems utilize a ram or piston to raise and lower the car by filling or releasing fluid into an airtight cylinder. With more standard features and custom options than any other elevator on the market today, Symmetry’s Hydraulic Drive Residential Elevator system is the industry leader.

Hydraulic Otis Elevator Phone Line Manuals

Unique in the market, no other company offers emergency battery-operated lowering, COP and hall stations digital position indicators, custom wood sills and energy-efficient LED lighting as standard features.

This drive system accommodates up to six stops, 50’0″ of travel and is equipped to hold up to 1,000 pounds.

Hydraulic Otis Elevator Phone Line Manual Pdf

Find a local Symmetry hydraulic elevator dealer to discuss your needs!

• Travel: Maximum of 50’0″ (minimum 12” between stops)
• Speed: 40 feet per minute
• Rated Capacity: 1,000 pounds
• Pit depth: 6” minimum (8” preferred)
• Stops: Two
• Opening: Single
• Overhead: Minimum of 7’10″ (94 inches) with a 7’0″ interior car height
• Warranty: Three-year limited parts

Viking Elevator Phone

• Modular 6-1/4 pound T-rail structure
• Car frame assembly
• 208/230 VAC, 60 Hz, 30 amp, single-phase power supply for motor controller
• 120 VAC, 60 Hz, 15 amp, single-phase power supply
• Code-compliant electrical disconnects included*
• Two 3/8″ 7×19 galvanized aircraft cables (14,400 lbs. breaking strength) with wedge rope shackles
• 80 mm diameter piston/102 mm diameter cylinder including 3/4 inch reducer bushing
• 3 HP submersed motor with 2-speed valve assembly
• Manual down valve for emergency lowering

• Slack rope safety device
• Line rupture valve
• Motor controller supply disconnects (located in controller)
• Car light supply disconnects (located in controller)
• Pit stop switch
• Car-top stop switch
• In-car emergency stop switch and alarm
• Safety switch for car gates/doors
• Battery backup emergency car lights and alarm
• Electro-mechanical hoistway door locking devices (doors by others)
• Enhanced gate/bypass monitor

• Programmable Logic Controller (PLC)
• Non-selective collective automatic operation
• S.M.A.R.T. System (Self-Monitoring Alert Response Technology)*
• Car Operating Panel (COP) with LED floor position indicator §
• Hall stations with call button and LED floor position indicator §
• Recessed phone box (phone jack included) §
• Automatic car lighting
• Single floor designated car homing
• Uninterruptible Power Supply (UPS) for car lowering and automatic car gate/door operation (if provided) in the event of power failure*

• Car size up to 15 square feet
• 7’0” interior car height
• Birch, Oak, or Maple flat veneer interior walls with flat ceiling*
• Matching wood handrail
• Matching wood car sill
• Unfinished plywood floor with sill set for 3/4” (flooring by others)
• 2 energy-saving recessed LED lights with Black trim rings*
• Light Oak, Birch or White 7’0” laminate accordion door

• Up to six stops
• Single automatic push button operation
• Custom car size up to 18 square feet**
• Custom car heights
• Shaker or Recessed panel car with flat ceiling
• Shaker, Recessed or Raised panel car with matching ceiling
• Four recessed LED lights with Black, Polished Brass, Brushed Nickel or Bronze trim rings*
• Factory-finished car
• Fixtures including COPs, hall stations, phone boxes and handrails available in:
  • Polished or Blackened Stainless Steel
  • Brushed, Polished or Oil-Rubbed Solid Brass
  • Powder-Coated Black or Vintage Bronze
• COP with integrated keypad phone
• Custom wood interiors
• Custom factory finish, Distressed*
• “Green” material alternatives and finishes for car interiors*
• 3/4 inch finished or unfinished installed hardwood car flooring
• Factory flooring insert for 1/4 inch flooring by others
• Buffer springs (requires minimum of 8-1/4 inch pit depth)
• Key switch for COP and/or hall stations
• Rated Capacity: 750 and 950 lbs.
• Light curtain monitoring the car entrance

• ‡Symmetry Safety 3-Panel car door*
• Two or three speed car door or car and landing doors
• Wrap around car door ‡
• Dark Oak, Chalk, Antique White, Cherry, Walnut or Black laminate accordion door
• Hardwood veneer accordion door
• Clear or Smoked acrylic panel accordion door
• Automatic car gate/door operator (not available on Enterprise collapsible gate)

Hydraulic Otis Elevator Phone Line Manual Software

* This symbol denotes Symmetry exclusive features
** May require local code authority approval
‡ Availability depends on code year
§ Standard finish is Brushed Stainless Steel, but multiple finishes available